3-way water tap Japura
The 3-way water tap Japura or also 3 in 1 tap, allows you to tap reverse osmosis water and tap water, from only one tap. Two of the connections, as with normal fittings, are for cold and warm tap water. The third connection is then finally reserved for the reverse osmosis water from your reverse osmosis system.
Material and handling of your 3-way water tap Japura
This faucet is made of chrome-plated brass and is therefore free of rust and pollutants. Due to its deep design, the Japura 3-way tap is ideal for smaller or lower kitchens. The upper lever is used to remove tap water. This can be dosed directly and also mixed. The high-quality joint bearing in the lever ensures optimum resistance during handling. On the right side is the dosing lever for the reverse osmosis water. This allows you to tap your freshly filtered water.
The separate pipes also allow you to take both types of water at the same time. Especially for smaller households and closed kitchens, this elegant and practical 3-way water tap is a beautiful addition to any reverse osmosis system just like I carry them in my shop.
This is how the 3-way water tap works:
In contrast to normal taps, a 3-way fitting is equipped with two separate internal pipes. The 2 main pipes will continue to be used as usual for the tap water. The ceramic valve in the mixer tap makes it very easy for you to select the desired temperature. There is a warm and a cold water connection for the tap water. In the third pipe, on the other hand, the pure reverse osmosis water flows. This is connected directly to the osmosis system and therefore does not come into contact with unfiltered tap water.
The 3-way fitting is connected via two flexible hoses and an osmosis hose. The two flexible hoses are connected to hot or cold water. They supply the tap with tap water. The osmosis hose is connected to the fitting via a connection set and comes directly from the reverse osmosis unit. The faucet itself replaces your existing faucet. So you don’t have to drill any more holes. All parts required for installation are already included with the valve.
H1: 165 mm B1: 50 mm B2: 220 mm
This fitting can be swivelled 360°. You will get 2 x DIN standard standard connections and
1 x 1/4 inch osmosis connection
Have fun with this great solution!