This Chlorine Dioxide Set Type MMS (Multieffective Mineral Substance) you can buy here cheap. It consists of 2 components, namely Sodium chlorite solution 25% + Hydrochloric acid 4%. Whether as normal set in glass or PP bottle or as travel set. You should have this set at hand everywhere you need to disinfect water. I offer here many different sizes and quantities.
You can select this set in different quantities and bottle types. You can choose between glass bottles, for long storage, or the shatterproof PP bottles for safe mobile use on the road.
The chlorine dioxide set type MMS, which you can buy cheaply here, has the following quality: The sodium chlorite 25% is an EU quality product. It has no technical or industrial quality. This sodium chlorite is approved for drinking water disinfection. To produce such, mix the sodium chlorite with the activator hydrochloric acid. Hydrochloric acid gives you the best results in activation. In addition, no unwanted unwanted residues remain after activation. By mixing the two components, chlorine dioxide becomes gas free. Attention. This gas is decisive for the disinfection effect. It should not be inhaled.
Immediately after activating the drops, pour the mixture directly into the drinking water. This mixture then acts against bacteria, viruses, fungi and small parasites. This chlorine dioxide MMS set is a real mixture of type MMS = Multieffective Mineral Substance.
The activation of the two components of the chlorine dioxide set takes between 20 and 30 seconds. The activation time may vary. This depends on the temperature of the liquids. Information on dosing the chlorine dioxide set type MMS can be found below.
Use biocidal products with care and always read the label and product information before use.
Hazard and safety information for
Sodium chlorite solution 25:
Contact with acids liberates very toxic gas. Harmful by ingestion, inhalation and skin contact. Causes severe eye irritation. Very toxic to aquatic organisms. If medical advice is required, have packaging or label ready. Keep out of the reach of children. Store only in original packaging. Do not breathe dust/fumes/gas/mist/vapour/spray. Wear protective gloves/protective clothing, eye/face protection. IF INGESTIONS: Immediately call TOXIC INFORMATION CENTER / doctor. In case of contact with skin (or hair): Immediately remove all contaminated clothing. Wash skin with water or shower. IF IN EYE CONTACT: Rinse gently with water for several minutes. Remove contact lenses if possible. Continue rinsing. Keep under lock and key. Disposal of contents/container according to local/national regulations. Further note: Avoid evaporation of the water content.
Hydrochloric acid 4%:
May be corrosive to metals. Causes skin irritation. Causes severe eye irritation. In case of contact with eyes: Rinse gently with water for several minutes. Remove existing contact lenses if possible. Continue rinsing. If swallowed: Rinse mouth. Do not induce vomiting. Wear protective gloves/protective clothing/eye protection/face protection. When sodium chlorite 25% and acid are mixed, the biocidal chlorine dioxide gas is produced. Biocide registration number: N-78932 as chlorine dioxide set.
CDH3000 LONG MMS = Multieffective Mineral Substance
Dosing of chlorine dioxide from the chlorine dioxide set type MMS:
You should generally use one drop of sodium chlorite with one drop of hydrochloric acid per litre of water for disinfection. If there is a stronger contamination, you can use up to 6 drops per litre of water. If you activate a larger amount of sodium chlorite, you can also use half the acid. More detailed information can be found in this instruction
By the way: A 100 ml bottle contains over 2000 drops.
Are you looking for an even simpler solution? Then please have a look at the activated chlorine dioxide solution, the CDH3000 . Chlorine dioxide is a Multieffective Mineral Substance = MMS